Bull 296/C3, Руководство пользователя, Страница: 26 / 123

Drawer Release Latch Bracket (296/C3)
The following procedures describe the removal and replacement of the 296/C3 drawer release latch
bracket. Before performing the following procedures, read the “Safety Notices” on page vii.
Removing a Drawer Release Latch Bracket
To remove a 296/C3 drawer release latch bracket, do the following:
1. Place the system into the service position as described in “Placing the 296/C3 into the Service
Position” on page 6.
2. Remove the front bezel as described in “Removing the 296/C3 Front Bezel” on page 15.
3. Remove the retaining screws located on the front and side of the drawer release latch bracket.
4. Pull the drawer release latch bracket off of the system.
1 296/C3 4 Drawer Release Latch Bracket Post
2 Drawer Release Latch Bracket (Left) 5 Drawer Release Latch Bracket (Right)
3 Drawer Release Latch 6 Retaining Screws
Replacing a Drawer Release Latch Bracket
To replace a 296/C3 drawer release latch bracket, do the following:
1. Place the system into the service position as described in “Placing the 296/C3 into the Service
Position” on page 6.
2. Align the drawer release latch bracket posts with the holes in the system. Push the drawer release
latch bracket into place on the side of the system.
3. Secure the drawer release latch bracket into place with two retaining screws.
4. Replace the front bezel as described in “Replacing the 296/C3 Front Bezel” on page 15.
5. Return the system to the operating position as described in “Returning the 296/C3 to the Operating
Position” on page 7.
10
296/C3 and 296/E3 Parts Guide