Bull Outdoor Outlaw 26038, Инструкции по сборке и эксплуатации

Страница: 13 / 23

INSPECTING / CLEANING BURNERS AND GAS
AILVE ORIFICES
{OON1.}
)
2. Light any burner by fUShing its contro knob in fully and slowly (3 to 4 seconds) turning it,bout
V4
turn to the le nter-clockwise) until a
click is heard. The 3 to 4 second duration shoula proviae enough gas to lign! me burner. lftlie Burner does not light, immediately return the
control knob to "OFF", wait several minutes for the gas to disperse, and repeat the process. After burner lights saccessfullYi, turn control knob to
"OFF".
3. Repeat process for each control knob/igniter, in turn, ensuring that other knobs are in "OFF" position as you perform each check.
4. If any burners fail to light after several attempts, discontinue gas supply at source and re-inspect for obstructions to gas flow and orifices.
VALVE
INSPECT IGNITION ORIFICE
I
\,_
INSPECT BURNER ORIFICE
BURNER
INSPECT ALL PORTS
12
f:ZIJ!N