background image

 
 

 

 

10 

 

 

LIGHTING & OPERATING INSTRUCTIONS

 

 
 
ROTISSERIE COOKING (sold separately)

 

 
Rotisserie is mostly used to cook large pieces of meat and poultry to assure slow, even cooking. The constant turning provides a 
self-basting action, making food cooked on a rotisserie exceptionally moist and juicy. Rotisserie cooking generally requires 1 ½ 
 to 4½ hrs to cook depending on the size and type of meat being cooked. You can have rotisserie cooking with indirect heat as 
shown or with infrared rotisserie burner. 
 
For successful roistering, the meat should be centered and balanced as evenly  
as possible on the spit rod to avoid overworking the rotisserie motor.(see rotisserie 
kit assembly shown below) 
 
Since indirect heat is often used in cooking on a rotisserie, a foil or aluminum  
drip pan is advisable to prevent excessive flare-ups. Generally, the cooking  
grills are removed to allow for the swing of the rotisserie. A basting pan is  
placed under the rotisserie area on top of the flame tamer(s) to catch the drippings. 
 

 

WARNING:     Never operate Rotisserie Burner with main (other) burner(s) “ON”.   

                       Warming Rack must be removed when Rotisserie Burner is ON

 

 

   

 

 

 

 

 

 

 
 
 
 
 
 
 
 
 

 

 

 
 
 
 

 
 
 
 
 

 

Содержание 54658


















Отзывы: