Bulk Man 3D Lead CNC, Инструкция по механической сборке

Страница: 24 / 27

Lead CNC Assembly Instructions 23 v1.0
© Bulk Man 3D 2019
Y-Axis and A-Axis Assemblies to Base.
Begin by using the Double L Bracket, 8mm screws and T-Nuts to attach the 2 x 2040 Centre Support
Rails to the 2 x 2040 Base Support Rails (front and back). Note the centre support rails have the
40mm side parallel to the horizontal (face up) while the front and back rails have the 20mm face
parallel to the horizontal (see image below).
Then place the Y-Axis, A-Axis and X-Axis Assembly on to the base, square everything and secure with
Double L Brackets, 8mm screws and T-Nuts. Note that when the assembly sits on the front and back
Base Support Rails there will be a space on both the left and right sides. The assembly can be placed
so the space is on either side (i.e., centred) or flush on one side with a large space on the other side.
In this way the space can be used to support and assist in cable management.
Note the C-Beam of the Y-Axis and X-Axis is the same length as the 2040 Centre Support Rails. This
means that the Y-Axis and A-Axis sit flush to the internal face of the Base Support Rails with the End
Mount Plate sitting on the top of the Base Support Rails (See A below).