Buildbotics 4-Axis CNC Controller, Начало работы

Страница: 9 / 16

Do the following things at the configuration screen for each motor port:
• Assign the axis to the motor
• Set the “drive-current” to the full load current found in the motor manual.
•
Set the “idle-current” to 0.
• Set the “step-angle” to the value found in the motor manual.
The remaining values can be set and adjusted based on experimentation with your machine.
Quick Start Guide (Network interface)
Following this quick start guide should get you up and running with network interface control.
Refer to the remainder of the manual for more complete and concise descriptions.
Things you need
Buildbotics CNC Controller
Stepper motors (NEMA 23 or smaller)
Buildbotics premade motor cables
Four wire connectors for each motor. (16-22
AWG wire nuts work fine). You may want to
solder final connections.
DC power supply that supplies between 12 and
36 Volts and a Buildbotics premade power
supply cable.
Alternatively use a power adapter with a
matching plug. The Meanwell GST280A24-
C6P is an excellent choice.
Logitech F310 gamepad (if you plan to do local
jogging)