Build Worker BG2000, Руководство по эксплуатации

Страница: 44 / 75

- 10 -
Tips and cautions for operating :
1.Do not start two or more machines simultaneously.Start them one by one.
2.Warm up the engine without load for about 3 minutes.If the generator is to supply power to more than one appliances,be
sure to connect them one by one with higher current rated first.
Most appliance motors require more than their rated wattage for start up.Do not exceed the current limit specified
for any one socket.
3.Be sure that all appliances are in good working condition before connecting them to the generator.If an appliance
begins to operate abnormally(becomes sluggish,or stops suddenly),turn off the generator main switch immediately.Then
disconnect the appliance and examine it for signs of malfunction.
If overloading of the circuit trips the AC circuit protector,reduce the electric load on the circuit,and wait a few minutes
before resuming operation.
If the indication of voltmeter is too or too high,stop the machine and examine it for cause of malfunction.The generator
can load when the indicator of voltmeter show at 230 10%(50hz)on the panel of control box.
4.DC application:Do not use DC 12v and AC at the same time.
The DC terminal may be used for charging 12 volt automatic-type batteries only.When using automatic-type batteries
with battery cables,be sure to disconnect the minus pole batter from the battery before charging.Do not reverse
the charging cables,or serious damage to the generator and/or battery may occur.
5.When connect the generator to home power circuit,be sure that a skilled electrician does the job.Improper connecting
between the generator and appliance may cause damage of the generator or appliance,and even a fire accident.
Warning:if the generator has to be connected to commerial power grid,make sure that the chief power switch must
be shut off.Otherwise the sudden recovery of commercial power supply may cause damage to generator or
appliance,and even a fire accident.