Buick Rainier 2005, Пособие по эксплуатации

Страница: 4 / 20

Getting to Know Your Rainier
4
Trip Information Button: Press
to access each of the odometer,
TRIP A, TRIP B and TIMER functions.
To reset either trip odometer to zero,
access it on the DIC and press the
Select button ( ) for one second, or
press and hold the reset stem on the
instrument cluster.
Use the TIMER function to time the
length of your trip, pressing to start
or stop the timer when the function is
displayed on the DIC. To reset it to zero,
press and hold when the function is
displayed on the DIC.
Fuel Information Button: Press
to access the range, average fuel
economy, fuel used and the GM Oil Life
System
TM
status.
RANGE estimates the remaining dis-
tance you can drive without refueling.
It is based on recent fuel economy and
remaining fuel.
AVG ECON calculates how many miles
per gallon you are getting based on cur-
rent and past driving conditions. Press
and hold the reset stem while it is dis-
played and the DIC will begin calculating
average fuel economy from that point in
time.
Driver Information Center (DIC)
The Driver Information Center (DIC) fea-
tures a message center that can display
trip information, fuel economy informa-
tion, personalization features and other
messages or warnings.The DIC display
is located above the steering wheel on
the instrument cluster, and can be pro-
grammed in three languages. To access
the various DIC modes, press one of
the four DIC buttons located on the
steering wheel: Trip Information, Fuel
Information, Personalization or Select.
Malfunction Indicator Lamp
(Service Engine Soon Lamp)
Located on the instrument panel, this
lamp illuminates under a variety of con-
ditions when the On-Board Diagnostics
II (OBD II) system detects a malfunction
in the vehicle’s emission controls. If it is
lit steadily, check the gas cap to ensure
that it is attached and securely fastened.
Turn it clockwise until a “ratcheting”
sound is heard, signaling that it is
secure. If this is the cause of the condi-
tion, and the cap is installed properly,
this should turn the light off.
See Section 3 of your Owner Manual.