Buick Rainer 2007, Пособие по эксплуатации

Страница: 10 / 20

Getting to Know Your Rainier
10
Easy Exit Driver Seat
Two customized driver exit seat posi-
tions can be set by following these
steps:
1. First, set the Easy Exit Driver Seat
feature to ON in your Driver
Information Center (see “Vehicle
Customization” in the Driver
Information Center section of this
booklet).
2. Select memory button 1 or 2 on the
driver’s door.
3. Move the driver’s seat to the desired
exit position.
4. Press and hold the Exit button
located on the driver’s door (shown
above) for three seconds. A double
chime will sound confirming that the
position has been stored.
With the vehicle in Park (P), the exit
seat position for that driver can be
recalled by pressing the Exit button.
If no exit position is stored, the seat
defaults to a completely rearward
position.
See Section 2 of your Owner Manual.
ENTERTAINMENT
Audio Systems
Radio with Cassette/CD and RDS
Setting the Clock: Press and hold the
H (or HR) button until the correct hour
appears. AM or PM will appear on the
radio display. Press and hold MN until
the correct minute appears.
To set the time to the time of an FM
station broadcasting RDS information,
press/hold HR and MN simultaneously
for two seconds until UPDATED and the
clock symbol appear on the display. If
the time is not available from the station,
NO UPDAT will appear.
Setting Stations: You can set up to 30
station presets (six AM, six FM1, six
FM2; an XM1 and XM2 satellite sub-
scription is available).
1. Turn the radio on.
2. Press BAND to select AM, FM1, etc.
3. Tune to the desired station using the
seek function or tune knob.
4. Press AUTO EQ or AUTO TONE (as
applies to your radio) to select the
sound equalization best suiting the
type of station selected.
5. Press/hold a numbered button until a
beep confirms storage of the station.
6. Repeat the previous steps for each
pushbutton.
Rainier 2007 A 4/13/06 1:27 PM Page 10