Buick 2011 Lucerne, Руководство пользователя

Страница: 244 / 447

Black plate (87,1)
Buick Lucerne Owner Manual - 2011
Using the “ Digit Dial ” Command
The digit dial command allows a phone number to be
dialed by entering the digits one at a time. After each
digit is entered, the system repeats back the digit it
heard followed by a tone.
If an unwanted number is recognized by the system,
say
“ Clear ” at any time to clear the last number.
To hear all of the numbers recognized by the system,
say
“ Verify ” at any time.
1. Press and hold
b g
for two seconds.
2. Say “ Digit Dial ” .
3. Say each digit, one at a time, that you want to dial.
After each digit is entered, the system repeats
back the digit it heard followed by a tone. After the
last digit has been entered, say
“ Dial ” .
Once connected, the person called will be heard
through the audio speakers.
Using the “ Re ‐ dial ” Command
1. Press and hold
b g
for two seconds.
2. After the tone, say “ Re ‐ dial ” .
Once connected, the person called will be heard
through the audio speakers.
Receiving a Call
When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle.
. Press
b g
to answer the call.
. Press
c x
to ignore a call.
Call Waiting
Call waiting must be supported on the cell phone and
enabled by the wireless service carrier.
. Press
b g
to answer an incoming call when
another call is active. The original call is placed
on hold.
. Press
b g
again to return to the original call.
. To ignore the incoming call, no action is required.
. Press
c x
to disconnect the current call and
switch to the call on hold.
Three ‐ Way Calling
Three ‐ way calling must be supported on the cell phone
and enabled by the wireless service carrier.
1. While on a call, press
b g
.
2. Say “ Three ‐ way call ” .
4-87