Getting to Know Your Enclave
8
Folding the Seatbacks
To fold the seatbacks forward to create
a flat load floor:
1. Pull outward on the handle located on
the outboard side of the seat cushion
and slide the seat rearward.
2. Fold the armrest into the upright
position.
3. Pull forward on the strap located on
the outboard side of the seatback and
fold down the seatback.
To return the
seatbacks
upright, pull up
the seatback
and push it
rearward until it
locks in place.
See Section 1 of your Owner Manual.
The 3rd-row 60/40 split bench seat fea-
tures folding seatbacks. Prior to folding
a seatback, make sure all of the seat-
belts are unbuckled, nothing is on the
3rd-row seat, and the 2nd-row seat is
not reclined.
Lift the lever (A) on the upper-back
outboard corner of the seatback until the
head restraint folds forward, and then
fold down the seatback.
3rd-Row Seats
B
A
The following
heated front
seat controls
are located on
the center
console in
front of the
shift lever:
(Heated Seat/Seatback):
Press the
bottom button to turn on the heated seat
cushion and seatback.
(Heated Seatback):
Press the top
button to turn on the heated seatback.
Continue to press the desired button to
cycle through the temperature settings
of High (three indicator lights), Medium
(two indicator lights), Low (one indicator
light), and Off (no indicator lights).
See Section 1 of your Owner Manual.
Heated Seat Controls
(if equipped)
To return the seatback to the upright
position, pull the seatback strap (B) from
the rear of the vehicle or lift up the seat-
back from inside the vehicle. Pull on the
seatback to make sure it is locked in
place. Lift up the head restraint to lock it
in place.
See Section 1 of your Owner Manual.
Heated and Cooled Seat
Controls (if equipped)
The following heated and cooled front
seat controls are located on the center
console in front of the shift lever:
(Heated Seat):
Press the bottom
button to turn on the heated seat.
