102
8.1.2.1
Device information - UNIT SETUP.
The screen provides information about the
hardware and firmware and the user's name
(user name). Hardware information is useful
when contacting the service and for a
personalized firmware version.
USER NAME
–
user name of the device
RESET TO DEFAULTS
–
restoring factory settings of the device
PIEZO TIME
–
minimum pressing time of PIEZO button on the device: from
10ms to 150ms. Setting a higher value reduces the "sensitivity"
of the buttons
RUN TIME
–
work time of the device
SOFTWARE VERSION
–
the firmware version installed on the device
HARDWARE VERSION
–
hardware version number of the device
SERIAL NUMBER
–
serial number of the device
To change the user name, select the
USER NAME
field with the SELECT button and
confirm with the CONFIRM button.
The
USER NAME
field will be deleted and the cursor set to the first character:
. Use the SELECT key to change the current character (cyclical, in
alphabetical order) and CONFIRM to the next character. The username will be saved after
all characters have been set. It is possible to insert a blank character (space) - this is the
first character when the SELECT button is pressed.
Содержание ZHL-16C GF
