Quantum Blue
®
Reader Software User Manual, Version 4.0
Release Date: 01-02-2021
12
CHAPTER 3: RUNNING QUANTUM BLUE
®
READER WITH QBSOFT
3.4 Measurement
The user has to enter a Patient ID and select a User ID before scanning of the Test Cassette can be started.
Additionally, the user can enter Expiry Date information of the test (cassette) and add some comments.
The user-accessible and / or –editable functions are:
The drop-down list box “Method” displays the Test
Methods which are stored on the Quantum Blue
®
Reader. Select the Test Method to be run.
Reading of RFID card automatically selects the
respective test method (see respective instruction for
use of the tests).
The user-editable text box “Patient ID” is used to add
a Patient ID to the results.
The drop-down list box “User” displays the Users who
are registered on the Quantum Blue
®
Reader. Select
the corresponding User ID. Manage User IDs under
section 3.9.
The user-editable text box “Exp. Date” allows to add
the Expiration Date of the Test Cassette to the results.
The user-editable text box “Comment” is used to add
comments to the results.
Start the test measurement (scanning process) on
Quantum Blue
®
Reader with the QBSoft Software.
During the measurement the function of the “Start’
button changes to a “Stop” function, so that the
scanning (and incubation) process can be interrupted
at any time. Note that the “Start” button is enabled
only when all of the user entry items (at least the
Method, Patient ID and User ID) are selected.
The grey “Info” box describes the current status of the
Quantum Blue
®
Reader while a test run (measure-
ment) is performed.
CHAPTER 3: RUNNING QUANTUM BLUE
®
READER WITH QBSOFT