Buhler SCS 104, Инструкция по установке и эксплуатации

Страница: 28 / 75

SCS 104
9 Appendices
9.1 Technical Data
Gas paths
Number of outputs 1 sample gas, 1 bypass
Calibrating Gases 6 calibrating gases + zero gas with common output
Materials in contact with media PTFE, stainless steel, Norprene, PVDF, PP, PC. Viton, glass fiber, epoxy resin,
borosilicate glass
Maximum sample gas and SpanGas 1..6 pressure
and zero gas 1.5 bar abs. (21.7 psi abs.)
Maximum blow back pressure 10 bar abs. (145 psi abs.)
Gas connections Bulkhead fittings (stainless steel) for 1/4“ tube
Free flow rate 550 l/h
350 l/h (at –150 mbar rel. at inlet and +120 mbar rel. at outlet)
Dead volume approx. 100 cm
3
Electrical specifications
Electrical control connections Switched by contact, common supply
Electrical outputs max. 230 VAC/150 VDC; 0,5 A; 50 VA, potential-free
Power supply (see type plate) 230 V/50 Hz or 115 V/60 Hz
Power input Max. 500 VA
Control input connection Terminal plug 16-pin, included
Output mode connection Terminal plug 16-pin, included
Status outputs connection Terminal plug 8-pin, included
Power connection M3-Stecker, included
Cooler Data
Cooling capacity at 25 °C/77 °F (40 °C/104 °F)
1)
360 (100) kJ/h
Maximum flow rate
1)
400 l/h
Max. gas inlet temperature
1)
180 °C (356 °F)
Max. inlet dew point (@1bar abs) 80 °C (176 °F)
Ambient temperature
1)
5…50 °C (41…122 °F)
Outlet dew point 5 °C (41 °F)
Dew point stability static 0.1 ºC (0.2 º F)
1)
The real limits depend in a rather complicated manner on a) the ambient temperature and therefore the cooling capacity and
b) on the heat exchanger material and the gas parameters themselves. If you need further information on the subject, look into
the help chapter of our cooler application program.
General Data
Dimensions (height x depth) 6 HE x 540 mm
Weight (varies by version) 28 kg (62 lbs)
Ready for use after max. 15 min
IP rating IP 20
26 Bühler Technologies GmbH BECS0031 ◦ 02/2020