Bühler technologies Nivotemp NT MD, Инструкция по установке и эксплуатации

Страница: 15 / 40

Nivotemp NT MD
5.5 Menu overview
The menu structure is based on the VDMA standard sheet 24574-1. The menu structure is hierarchic. The top menu level contains
the main menu items, e.g.
tEMP , b.EF , diA , E . Each main menu has additional submenu items.
The menu items may vary depending on the device configuration. Not all menu items described below will necessarily apply to
your device. Press the
key in display mode to open the configuration. A 4-digit code will appear, e.g.
With the 4 digits tsav meaning:
t: Model
s: Number of switching outputs
a: Number of analogue outputs
v: Device installation type
t = temperature measurement
1, 2 or 4
0 for 1
i = standard installation (tank installation)
F = remote display
Configuration
Equipment configuration
t___
____
tEMP
Display
Measurement display
Temperature
Temperature main menu
out1
Settings menu OUT1
Out 1
out_
Settings menu OUTX
Out X
An 1
Settings menu Analog 1
Analog Out 1
E
Exit menu level
Exit
b.EF
Basic Adv. Functions
Basic EF
If applicable
If applicable
DiA
Diagnostics menu
Diagnostic
E
Exit menu level
Exit
____ ____
Toggle display
Toggle
The individual menu items will not be shown if the option does not apply. Example: With a=0 the menu items for configuring
the analogue output does not apply. You can then skip the description for this item.
The switching outputs or analogue outputs can be configured in the
Temperature
( tEMP ) main menu.
The basic device settings can be changed. General settings can be configured under Basic Settings Advanced Functions (
b.EF
).
These settings should be configured first, as they affect the displays and settings for the individual menus. These settings are
e.g. the units used.
The
Diagnostic
( dia ) menu further contains diagnostics options.
For the detailed illustration of the entire menu structure please refer to the original operating instructions at the end of this
chapter.
13 Bühler Technologies GmbH BE100022 ◦ 11/2020