Bühler technologies Nivotemp NT M-XP, Инструкция по установке и эксплуатации

Страница: 18 / 42

Nivotemp NT M-XP
5.6.9 Assigning the upper limit of the sensor measuring range
This determines the display value (upper limit for the measuring range) for the maximum liquid level:
Basic EF
b.EF
Basic Adv. Functions
o.Hi
Assign 100 %
Set Upper ____
-999 - 9999
Selection menu
Setting range:
-999…9999
Assigns the maximum display value (upper limit of the measuring range) to the maximum liquid
level.
Note:
– For the add-on sensor the display range is preset to 0-100 %.
5.6.10 Sensor measuring range lower limit assignment
This determines the display value (lower limit of the measuring range) for the minimum liquid level:
Basic EF
b.EF
Basic Adv. Functions
o.Lo
Assign 0 %
Set Lower ____
-999 - 9999
Selection menu
Setting range:
-999…9999
Assigns the smallest display value (lower limit of the measuring range) to the minimum liquid
level.
Note:
– For the add-on sensor the display range is preset to 0-100 %.
5.6.11 Restore factory settings (Reset)
Use the Reset function ( rES ) to restore the factory settings. All changes will be lost. Since this will also reset the limits, you must
check the liquid level and temperature settings.
Basic EF b.EF
Basic Adv. Functions
rES
Factory setting
Reset ___
no - YES
Confirm
The options are:
Original status:
No,
keep current settings Original status:
Yes,
reset settings to the factory defaults.
The factory settings are:
Definitions:
SP x / rP x Switching point / switch-back point x
ds x / dr x Switch-on delay / switch-back delay for switching output x
A x ..Hi / A x .Lo Maximum and minimum measurement for output
A.ou x Analogue output signal type
ou x
Switching characteristic for switching output x
o.uni
/
t.uni
Unit for liquid level / temperature
o.Hi / o.Lo maximum / minimum liquid level
r.ou x Switching output x liquid level or temperature monitoring allocation
dis Display refresh rate
Loc Keylock
SJ.ou switching output logged
do.MM Delay for recording the minimum / maximum liquid level
dt.MM Delay for recording the minimum / maximum temperature
Note: For customer-specific specifications the factory preset may vary from those listed here.
16 Bühler Technologies GmbH BE100023 ◦ 06/2021