Buggies4One RAMBLA Mk 1, Руководство пользователя

Страница: 9 / 23

Page 9
Fit the Seat Support pillar. Locate the bolt into the centre hole and tighten.
Height adjustment up or down can be done later to suit the driver. Make
sure the orientation is correct.
The seat can be assembled from the front by locating the sliders onto the
end of the guide rails. It will slide on and stop. By operating the seat
adjuster, the final position can be chosen.
The seat can be adjusted 2 ways.
1) Forward/Backward – Pull the lever under the right-hand side of the
seat and adjust to desired position.
2) Vertical – 3 different height positions adjusted by removing the nut
and bolt on the centre support.