35
Cleaning and maintenance
ALWAYS UNPLUG THE SMART COOKING APPLIANCE WHEN IT IS NOT IN USE
AND BEFORE CLEANING IT. DO NOT UNPLUG THE SMART COOKING APPLIANCE
BY PULLING ON THE CABLE. DO NOT IMMERSE CABLE (6), PLUGS, BASE (4)
AND BOTH HEATING ELEMENTS (1 and 2), OR THE SMART COOKING APPLIANCE
ITSELF IN WATER OR OTHER LIQUIDS, EITHER PARTIALLY OR TOTALLY.
1)
BEFORE CLEANING THE SMART COOKING APPLIANCE, UNPLUG IT.
Do not unplug it
by pulling on the cable.
2) Wait for the smart cooking appliance to cool before fitting or removing parts and before cleaning the smart
cooking appliance.
3) The smart cooking appliance must be cleaned with a dry or slightly dampened non-abrasive cloth soaked
with a few drops of neutral non-corrosive detergent (never use solvents).
4) Clean all the surfaces of the smart cooking appliance.
5) The proximity touch screen display (10) containing the control and operating buttons must be cleaned only
with a soft and dry cloth.
6) To clean the glass heating elements (1 and 2) please remove them: firmly hold the glass heating element
by the pulling levers (7). Pull it through up. Repeat the same steps with the other heating elements.
When removed put them on a flat surface and clean both sides with a dry or slightly dampened non-abrasive
cloth soaked with water or a few drops of neutral non-corrosive detergent (never use solvents). After
cleaning the side with the protection glass (8) please open it to clean the inner glasses with a dry or slightly
dampened non-abrasive cloth soaked with water or a few drops of neutral non-corrosive detergent (never
use solvents). Before re-position the glass heating elements (1 and 2) in the slots of the smart cooking
appliance base (4) to be used again, make sure that they are completely dry.
7) While the glass heating elements are removed, clean the lift (3) with a small brush.
8) To clean the crumb tray (5), just carry out the following steps:
a) Remove the crumb tray (5) from the smart cooking appliance base (4) by pushing on it. It comes automatically
out by some millimeters and then pull it out.
b) Wash all the surfaces by hand and with neutral detergents.
c)
MAKE SURE THAT IT HAS BEEN DRIED COMPLETELY BEFORE FITTING IT INTO
THE SMART COOKING APPLIANCE AGAIN. BE SURE TO INSERT THE CRUMB TRAY
INTO ITS GUIDES.
