background image

30

WARRANTY

Model ____________________________
Serial No. _________________________
Date Purchased: ___________________

For a period of twelve (12) months from delivery, Bug-O Systems warrants to the original purchaser (does not include authorized
distributors), that a new machine is free from defects in material and workmanship and agrees to repair or replace, at its option,
any defective parts or machine. This warranty does not apply to machines, which after our inspection, are determined to have
been damaged due to neglect, abuse, overloading, accident or improper usage. All shipping and handling charges will be paid
by customer.

Bug-o Systems makes no warranty of merchantability and makes no other warranty, expressed or implied, beyond the warranty
expressly set forth above. Buyer’s remedy for breach of warranty, hereunder, shall be limited to repair or replacement of non-
conforming parts and machines. Under no circumstances shall consequential damages be recoverable.

HOW TO OBTAIN SERVICE:
If you think this machine is not operating properly, re-read the instruction manual carefully, then call your Authorized
Bug-o Systems dealer/distributor. If he cannot give you the necessary service, write or phone us to tell us exactly what
difficulty you have experienced. BE SURE to mention the MODEL and SERIAL numbers.

Limited Warranty

Содержание HDT-1000































Отзывы: