mixture of numbers and letters from A–Z and 0–9. For WPA-PSK you can enter
eight to 63 characters. This Network key needs to match the key you assign to
your Wireless Router or access point.
5. Click “OK” to save the settings.
Advanced
Multicast Rate
This is the transmission speed used when the Modem Router transmits to
multiple clients at the same time. Multicasting is common in applications that
involve audio and/or video streams. The default setting, Auto, usually gives
the best results, but a fixed, high rate may be preferable in some environ-
ments.
Frame Bursting
Choose the Frame Bursting mode. You can select “125* High Speed
Mode”.”Frame Bursting” or “Disable”. Frame Bursting is a technology that im-
proves the transmission rate by sending frames seamlessly.125* High Speed
Mode is an advanced frame bursting mode with even higher throughput. To
function at their highest speeds, both of these technologies require clients
that support and are set up to use the same mode.125* High Speed Mode is
recommended. Default setting is “Disable”.
802.11g Protection
The default setting of Auto for this control helps to preserve the performance
of 802.11g clients in an environment of mixed 802.11 client types. The Off
setting is recommended only for an 802.11g-only environment.
802.11n Protection
The default setting of Auto for this control helps to preserve the performance
of Draft-802.11g clients in an environment of mixed 802.11 client types. The
Off setting is recommended only for a Draft-802.11n-only environment.
