Important Safety Information
2
Rotary Tiller SRT72
These are common practices that may or may not be applicable to the products described
in this manual.
Practice Safe Maintenance
▲
Understand procedure before doing
work. Use proper tools and
equipment, refer to Operator’s
Manual for additional information.
▲
Work in a clean dry area.
▲
Lower attached implement to the
ground and follow all shutdown
procedures before leaving the
operator’s seat to perform
maintenance.
▲
Allow implement to cool completely
before working on it.
▲
Disconnect battery ground cable (-)
before servicing or adjusting
electrical systems or before
welding on implement.
▲
Do not grease or oil implement
while it is in operation.
▲
Inspect all parts. Make sure parts
are in good condition & installed
properly.
▲
Remove buildup of grease, oil, or
debris.
▲
Remove all tools and unused parts
from implement before operation.
Use Safety
Lights and Devices
▲
Slow moving self-propelled
equipment, and towed
implements can create a hazard
when driven on public roads. They
are difficult to see, especially at
night.
▲
Flashing warning lights and turn
signals are recommended
whenever driving on public roads.
Transport Safely
▲
Comply with state and local laws.
▲
Never travel at a speed which does
not allow adequate control of
steering and stopping. Some rough
terrains require a slower speed.
▲
Avoid contact with any over head
utility lines or electrically charged
conductors.
▲
Always drive with load on end of
loader arms low to the ground.
▲
Always drive straight up and down
ramps with load on “uphill” side of
skid steer.
▲
Engage parking brake when
stopped on an incline.
▲
IMPORTANT:
Do not tow a load
That is more than double the weight
of the vehicle towing the load.
▲
Usetowingvehicleandtrailerofadequa
tesizeandcapacity.Secureequipmen
t towed on a trailer with tie downs
and chains.
▲
Sudden braking can cause a towed
trailer to swerve and upset. Reduce
speed if towed trailer is note
quipped with brakes.
Shutdown and Storage
Before leaving operator’s
seat:
▲
Lower lift arms and put
attachment flat on the ground.
▲
Turn off engine and engage
parking brake.
▲
If included, raise seat bar and
move controls until both lock.
▲
Remove key to prevent
unauthorized starting.
▲
Use steps, grab-handles and
anti-slip surfaces when getting
on or off the loader.
▲
Detach and store implements in
an area where children normally
do not play. Secure implement by
using blocks and supports.
OFF
