Igniting the Hokker
1. Place the pan carrier .
2. Turn the knob to the “
normal
" position. keep the knob pressed and press the ignition button a few times
until the burner is burning completely. Keep the knob pressed in for approximately a further 10
seconds. The burner will continue to burn.
Turning off the gas griddle:
3. Turn the knob completely to the right. The burner will go out.
Note! After turning off the burners, wait approximately 10 minutes before reigniting the burners.
After turning off the burners, always turn off the main tap on the gas supply!
Problems:
possible cause
gas ring will not light:
- ignition defective
- thermocouple defective
- igniter dirty
- gas hose kinked
- injector blocked
gas ring does not light fully:
- gas hose kinked
- gas tap not fully open
- main injector blocked
- gas tap defective
