MCDSG Double Seat Glider Chair Assembly Instructions
3
ASSEMBLY
1) Connect main frame &
crossmember #1 & #2. insert
the End Cap (H). Use Long
Screw + Small Washer +
Frame + Small Screw + Nut
2) Connect chair frame and
crossmember #5 & #6 by
firmly pressing the kinked end
into the open end.
Connect chair back and seat
with Small screw + Big
#7 & #8 + Big
Nut
Connect seat hardware with
Small Screw + Big
Seat + Big Nut
Place the seats inside
the frame.
Assemble by using the
hardware Small Screw +
Big Frame +
Big Nut
Long Screw + Small Washer
+ Frame + Seat +
Side S Small
Nut
Add hardware Long Screw
+ Small Frame +
Side S Small
Nut
Assemble Long
Screw + Small
Frame +
Small
Nut
Assemble Seta & Chair
frame with Long Screw
+ Small
Frame + Small
Nut
Place side support between two
frames. Use hardware Long Screw
+ Small Frame + Big
S Big Washer
Nut + Acorn Nut
Put chair frame and seat
inside the main frame.
REVIEW ALL WARNINGS ON BACK PAGE
