Backup
The LinkStation’s built-in backup utility
can back up files on your LinkStation to
an attached USB hard drive or to another
LinkStation on the local network. For best
results, reformat attached USB hard drives
with ext3 before use as backup storage.
If backing up to another LinkStation, then
the target LinkStation should be connected
to the same network as the LinkStation doing
the backup. If the target LinkStation is on a
different subnet or network, then you’ll need
to create a VPN connection between the two
networks before it can be used as a backup
target.
To create a backup job, click on a job number. The
Edit Backup Job
dialog will appear.
