6
Make sure that the power
switch on the rear of the
TeraStation is in the
ON
position, with the “
I
” symbol
pressed down.
TeraStation Quick Setup
Press the
power button
on the
front panel. The LEDs will swirl
as your TeraStation boots up.
After your TeraStation has completed booting up and the LEDs have
ceased to swirl, check the
LINK/ACT LED
on the front of the TeraStation.
If it’s lit, then your TeraStation is connected properly, and you can go on
to
page 8
. If it’s not lit, turn to
page 7
for troubleshooting.
