Buffalo GH489, Инструкция по эксплуатации

Страница: 8 / 36

3
Cleaning the Carriage and Food Grip
1.
Disconnect the appliance from the power supply.
2.
Lift the food grip from the cradle.
3.
Tilt the cradle away from the appliance [Fig. 1] .
4.
Wash with warm soapy water.
5.
Dry thoroughly.
Cleaning / Changing the Blade
1.
Disconnect the appliance from the power supply.
2.
Push the carriage away from the blade.
3.
Unscrew and remove the centre plastic cap securing the blade.
4.
Carefully lift the blade from the appliance.
5.
Wash the blade by wiping from the centre towards the edge.
6.
Dry thoroughly.
7.
Replace the blade, ensuring the centre plastic cap is securely tightened.
Cleaning Behind the Blade
With the blade removed use a slightly damp cloth to clean the area behind the blade.
Dry thoroughly before replacing the blade.
Troubleshooting
Note: BUFFALO recommend the use of cut-resistant or wire mesh gloves when cleaning the
blade.
Fault Probable Cause Action
The unit is not working The unit is not switched on Check the unit is plugged in correctly
and switched on
Plug and lead are damaged Call BUFFALO agent or qualified
technician
Fuse in the plug has blown Replace the plug fuse
Power supply Check power supply
The unit is not working Internal wiring fault Call BUFFALO agent or qualified
technician
The cradle does not move
smoothly along the carriage Food trapped beneath cradle Tilt cradle and clean carriage