INSTALLATION
1. Drill a 7/16” (11mm) hole through mounting fixture.
2. Pass wires from the shade through hole in fixture.
3. Secure the shade to the fixture with nut.
4. You may unscrew the threaded nuts to adjust the length to fit your requirements.
5. The wires in this product are brown – live, blue – neutral and green/yellow for earth.
Caution; Hot Surface.
CLEANING
NOTE:
Proper maintenance plays an important part in the life span and functioning of the shade.
1. Disconnect the heat shade from the power source prior to cleaning and ensure the surface is cool.
2. This unit can be cleaned with a damp sponge and mild soap. Rinse with clean water and wipe dry.
3.
Do not immerse in water or other liquid.
The heat lamp must not be cleaned by a water jet.
MAINTENANCE
HEAT BULB REPLACEMENT
NOTE:
Each standard Heat Shade is suitable for a clear or infrared heat bulb rated at or below 250 watts.
1. To replace a bulb, place the switch in the OFF position and allow the bulb and shade to cool
completely.
2. Bulbs have a threaded base, Unscrew the bulb counterclockwise from the unit and replace with a new
bulb.
Disposal
EU regulations require product to be disposed of by specialist companies who remove or recycle all gasses,
metal and plastic components.
Consult your local waste collection authority regarding disposal of your appliance. Local authorities are not
obliged to dispose of commercial refrigeration equipment but may be able to offer advice on how to dispose of
the equipment locally. Alternatively call the BUFFALO helpline for details of national disposal companies
within the EU.
Compliance
The WEEE logo on this product or its documentation indicates that the product must
not be disposed of as household waste. To help prevent possible harm to human
health and/or the environment, the product must be disposed of in an approved and
environmentally safe recycling process. For further information on how to dispose of
this product correctly, contact the product supplier, or the local authority responsible
for waste disposal in your area.
BUFFALO parts have undergone strict product testing in order to comply with regulatory standards and
specifications set by international, independent, and federal authorities.
BUFFALO products have been approved to carry the following symbol:
