2
UK
Operation
Location of Controls
Before Using for the First Time
BUFFALO recommend that the appliance is cleaned out before using for the first time, or if the appliance
has been sat unused for an extended period of time.
1.
Fill the water reservoir with cold water.
2.
Slide the empty filter basket into position between the two basket tabs.
3.
Place the jug on the base hotplate beneath the basket.
4.
Turn the Brewing power switch On
. The Brewing Indicator lights up and hot water will begin to fill
the jug.
5.
Once finished the Brewing Indicator light will switch off. Discard the hot water in the jug.
6.
Repeat steps 1-5. The appliance is now clean.
Note: Use the Jar to fill the reservoir to ensure the maximum capacity of the jar is not
exceeded. The maximum amount of water the reservoir can contain is 2.2 litres.
Note: During operation, steam may rise from the appliance and loud bubbling noises
may be heard. This is perfectly normal.
WARNING: The glass jug becomes hot during operation. Always pick up the jug by the
handle to avoid injury.
Water reservoir
Brewing Indicator
light
Filter basket
Base hotplate
Upper hotplate
Basket tabs
Upper hotplate
power switch
Brewing power
switch
Jug
