7
Programming Cook Factor
To change cook factor for a preset pad
1.
Open the door
• Display turns off
2.
Press and hold number 1 pad.
• Oven enters Programming mode and will show PROGRAM in the display
3.
Press number pad to be programmed
• Program number will show in the display
• For single digit entry, press only one number pad
• For multiple digit entry, press from one to three pads one by one
4.
Press X2 pad to change cooking factor
• Current cook factor will be displayed
• Factory setting for cook factor is 80%. (CF:80 in the display)
5.
Enter desired cook factor by using number pads (0-9)
• Number 1 pad for 10% of cook factor through number 0 pad for 100% of cook factor
6.
Press START pad to save the cook factor changes
•To discard changes, press STOP pad
Wattage Output Chart
A power level is selected by pressing the POWER LEVEL pad. The chart shows the number of POWER LEVEL pad presses, the power level display and the
percentage of power
Power Level pad
(no. of presses)
Power Level
(Display)
1
HI
2
70%
3
50%
4
20%
5
0%
