BSMOW07 2.4GHz Wireless 5 Buttons Optical Mouse
Page 3 of 8
1.0 Edition
Precaution
The optical mouse
can not
work on a glass or mirror surface. Avoid operating this
mouse on a glossy surface; otherwise, this mouse may not operate normally.
For consideration of saving battery power, it is strongly recommended to operate
an optical mouse on a bright surface with fine texture to obtain lower power
consumption of the high illumination LED. A very dark surface will cause higher power
consumption.
For optimal performance, mouse should be no more than 5M away from
receiver.
For a better transmission distance, avoid using this device on a metal plate or
desktop because a large surface of iron, aluminum, copper and other metal will act as
a shield or ground to the RF antenna of the mouse and receiver. Operating on a metal
surface may shorten the transmission distance.
If your notebook computer has a metal (contains Al or Mg) case, the metal
housing of the LCD panel will isolate partial radiation of the RF signal from the mouse.
This could possibly result in reducing the distance of transmission when you operate
the mouse right in front of the notebook and when the receiver is connected on the
back of the notebook. However, the RF mouse should work properly while you are
operating the mouse just beside your desktop computer.
