Buffalo APBCD277 Скачать руководство пользователя страница 2

1

Safety Tips

Position on a flat, stable surface.

A service agent/qualified technician should carry out installation and any repairs if required. Do not 
remove any components on this product.

Consult Local and National Standards to comply with the following:

• Health and Safety at Work Legislation

• BS EN Codes of Practice

• Fire Precautions 

• IEE Wiring Regulations

• Building Regulations

Always stand BEHIND the safety guard when operating the appliance.

DO NOT place hands near the blade when in use. This can result in severe injury.

DO NOT touch the blade edge.

DO NOT remove food from the appliance until the blade has come to a complete stop.

DO NOT immerse the appliance in water. 

DO NOT attempt to cut bones or items that have been frozen below -6°C. This can damage the blade.

Always switch off and disconnect the power supply to the appliance when not in use.

NEVER leave the appliance unattended when in use.

Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of 
local authorities.

If the power cord is damaged, it must be replaced by an BUFFALO agent or a recommended qualified 
technician in order to avoid a hazard.

This appliance must only be used in accordance with these instructions and by persons competent to 
do so.

This appliance is not suitable for use by children.

Product Description

CD277-A 

- 220mm blade

CD278-A

 - 250mm blade

CD279-A 

- 300mm blade

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of 
this machine will provide the best possible performance from your BUFFALO product.

T

HE

 M

EAT

 S

LICER

 

IS

 

A

 

DANGEROUS

 

APPLIANCE

 

AND

 

MUST

 

ONLY

 

BE

 

USED

 

BY

 

TRAINED

 

PERSONNEL

 

IN

 

ACCORDANCE

 

WITH

 

THESE

 

INSTRUCTIONS

 

Содержание APBCD277









Отзывы: