Buffalo AirStation WLI-USB-LIIG, Руководство пользователя

Страница: 3 / 32

WLI-USB-L11G Manual
This section explains the symbols, signs and terminology used in this manual.
A PC with the MELCO USB client installed is called the Wireless LAN PC.
The following terminology is used in this manual to distinguish between an Ethernet 10/100BASE-T LAN
and a Wireless LAN and should not be construed as generally accepted terminology outside this context.
• Ethernet LAN: A LAN connected by cables
• Wireless LAN: A LAN connected by radio signal
• The PC to change the AirStation access point settings: The Setting PC.
For your safety be sure to read, understand and follow the instructions below thoroughly before using
the product. This manual contains instructions concerning general operation of the computer to which
the product is connected in addition to those concerning the product itself.
Please take note that our warranty will not cover any failures and problems of the computer, any losses
and failures of data, or failures and problems of the product caused by misuse.
Signs:
WARNING The instructions with this sign indicate prohibited actions. Failure to follow the
instructions shown with this sign may result in death or serious injury to the user.
CAUTION Failure to follow the instructions shown with this sign may result in injury to the user
or property damage.
Symbols:
∆
This indicates warnings and cautions. (Ex. Exercise care to avoid electric shock.)
This indicates prohibiting actions. (Ex. Do not disassemble.)
• This indicates what must be done. (Ex. Disconnect the plug from the outlet.)
WARNING
Strongly recommended: Follow the warning and caution instructions which are issued by the PC and
peripheral manufactures.
Prohibit: Do not attempt to disassemble or repair the WLI-USB-L11G. This may result in fire or
electric shock.
Strongly recommended: Install this product away from children. Failure to do so may result
in injury.
Prohibit: Do not handle the equipment with wet hands while it is in operation. This may result
in electric shock.
Do not bend the cable too much. If the USB cable is damaged, replace it.
iii