Chapter 3 Connect to a Wireless Network
WLI-UC-G300N / WLI-UC-AG300N User Manual
19
8
Use an administrative computer which is connected to an access point with a wire in order to
login to that access point. The screen to enter the PIN code will be displayed.
Note: If the access point you are trying to connect is the AirStation, click “
Wireless Config
“> “
WPS
” on the TOP
of the configuration screen. The screen to enter the PIN code will be displayed.
9
On the configuration screen of
the access point, enter the PIN
code you write down in step 6.
Follow the instructions displayed on the screen to configure.
You have completed the connection with WPS (PIN) after you configured and when the message
"
Connection has been Completed
" is displayed in Client Manager V.
(If “
Set Network Location
” screen is displayed, select “
Home
”, “
Work
”, or “
Public location
” depending on
the environment in which the AirStation will be used.)
Note: If the access point you are trying
to connect is the AirStation,
enter the PIN code in “
Enrollee
PIN
” and click “
OK
”.