Slide Channel Strip Insert into
the bottom of rack
8
Loosen screw and slide rack,
short Channel Strip Insert at
bottom, into support brace
Slide rack into the support
brace on the opposite side.
(Trim Channel Strip again if
rack doesn’t fit completely )
9
ITEM # ABARL47 / ABARL53 INSTALLATION INSTRUCTIONS
READ AND UNDERSTAND ALL WARNINGS BEFORE ASSEMBLY
QUESTIONS?
CONTACT BUFFALO CORPORATION
CUSTOMER SERVICE
636-532-9888
10
Center the rack, so it is evenly
spaced between the two
support braces
11
Use phillips screwdriver and
tighten screw on both sides
12
Repeat the process on back of vehicle
14
DO NOT EXCEED
165 LB MAX LOAD
(INCLUDES ALL ACCESSORIES)
13
Insert key, unlock end cap, then
insert. Once in place, lock end
cap. Repeat on opposite side
END CAP TOP
