-4-
UK
Troubleshooting
Fault
Probable Cause
Action
The unit is not working
The Unit is not switched on
Check the unit is plugged in
correctly and switched on
Plug and lead are damaged
Call BUFFALO agent or qualified
technician
Fuse in the plug has blown
Replace the plug fuse
Power supply
Check Power Supply
Internal wiring fault
Call BUFFALO agent or qualified
technician
Bags are not sealing correctly
Moisture in bag under the sealing
bar
Ensure inside of the bag is dry and
free from moisture where it is to be
sealed
End of bag not placed above
sealing bar
Move end of bag over sealing bar
Technical Specification
Model
Voltage
Power
Current
Max Sealing
Length
Dimensions
h x w x d mm
Weight
(kg)
GJ459
230V 50Hz
260W
1.1A
305mm
235 x 430 x 85
2.85
Electrical Wiring
This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a
5
amp fuse as standard.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
•
Live wire (coloured brown) to terminal marked L
•
Neutral wire (coloured blue) to terminal marked N
•
Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection
being required they must be readily accessible.
