Buffalo Tools SB15, Инструкции по сборке и эксплуатации

Страница: 3 / 10

SB15 15 Lb Capacity Portable Soda Blaster Assembly & Operating Instructions 3
IMPORTANT SAFETY RULES
COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT.
THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR.
Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents
or injury.
Do not operate the
soda blaster
in explosive areas, such as in the presence of flammable liquids,
gases or dust. Tools create sparks which may ignite the dust or fumes.
Keep bystanders, children and visitors away while operating the
soda blaster . Distractions can cause
you to lose control.
Do not force tool. Use the correct tool for your application. The correct tool will do the job better and
safer at the rate for which it is designed.
Store idle tools out of reach of children and other untrained persons.
Tools are dangerous in the hands
of untrained users.
Always check to make sure that the trigger is not on before connecting blaster to air supply. Tool may
cause damage to property or person if plugged in while on.
Wash hands after handling the air hose. Touching the air hose could expose you to lead, which is known in
the State of California to cause cancer, birth defects and other reproductive harm.
All work areas should be clean and well lit. Accidents are more likely to occur in poorly lit and cluttered
areas.
Keep children, and other distractions at a distance while operating the Soda Blaster.
Keep the air hose in good condition, and replace damaged air hose immediately. Keep the air hose
away from materials and surfaces that could damage air hose.
Use common sense while operating this soda blaster.
Do not use this tool if you are:
•
Feeling tired or are under the influence of alcohol or drugs.
•
Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts.
•
Overreaching or have improper footing. Handling the tool in this way could cause serious injury.
•
When using this Soda Blaster, always:
•
Wear the proper safety equipment, such as safety goggles, dust masks, non-skid shoes, etc.
•
Check to be sure all adjusting keys or wrenches have been removed before starting the power tool.
•
Check that the power switch is in the “OFF” position before plugging the unit into an electrical outlet.