IMPORTANT SAFETY INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury.
Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
Keep bystanders, children and visitors away while operating a power tool. Distractions can cause you to lose control.
TOOL USE & CARE
Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or
against your body is unstable and may lead to loss of control.
Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is
designed.
Do not use the tool if the power switch does not turn it “ON” or “OFF”. Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
People with pacemakers or other electronic devices should consult with a physician before operating this product. Interruption
or failure of the pacemaker could occur when electrical equipment is operated within close proximity of electrical devices.
Inhaling dust created as a result of construction projects could be hazardous to your health. Construction dust may contain
chemicals, which are known to cause cancer, birth defects and other reproductive harm in the State of California.
These chemicals could be, but are not limited to: lead from lead based paints, crystalline silica from bricks or cement, arsenic, and
chromium from chemically treated-lumber.
To reduce your risk of exposure to harmful materials: always wear a dust mask that is designed to filter out hazardous microscopic
contaminants, always work in a well ventilated area, and wear other approved safety equipment.
Wash hands after handling the tool. Touching the tool could expose you to lead, which is known in the State of California to cause
cancer, birth defects and other reproductive harm.
All work areas should be clean and well lit. Accidents are more likely to occur in poorly lit and cluttered areas.
Do not operate power tools in the presence of flammable liquids, gas, or dust. Sparks created from the power tool could ignite
flammable materials.
Keep children, and other distractions at a distance while operating power tools.
PS07215 18 Volt Cordless Drill Operating Instructions
3
