Buffalo Tools MOTOR25, Инструкция по эксплуатации, Страница: 11 / 48

11
1. Place the throttle trip in the fully closed position. (N)
2. Turning the outboard motor around 180°.
3. Move the gear shift lever quickly and firmly from neutral to reverse. (O)
NOTE:
The outboard motor can turn 360° in its bracket (full-pivot system). The boat
can also be backed up by simply turning the outboard motor around 180°
with the steering handle facing toward you.
Tiller
1. Change direction: To change direction, move the tiller handle to the left or
right as necessary. (P)
2. Change speed: Turn the grip counterclockwise to increase speed and clockwise to decrease speed.
3. Throttle indicator: The throttle indicator is on the throttle grip. The fuel
consumption curve on the throttle indicator shows the relative amount of
fuel consumed for each throttle position. (Q)
Choose the setting that offers the best performance and fuel economy for
the desired operation.
4. The throttle friction adjuster is located on the tiller handle,. It provides
adjustable resistance to movement of the throttle grip and can be set
according to operator preference. To increase resistance, turn the adjuster
clockwise. To decrease resistance, turn the adjuster counterclockwise.
When constant speed is desired, tighten the adjuster to maintain the desired
throttle setting. (R)
Do not over-tighten the friction adjuster. If there is too much resistance,
it could be difficult to move throttle lever or grip, which could result in an accident.
Stopping the Engine
Before stopping the engine, first let it cool off for a few minutes at idle or low
speed. Stopping the engine immediately after operating at high speed is not
recommended.