www.buenoptic.net
Contact: [email protected]
2.3.2 Using the CANFDNET-100T/200T
(1)
Modify the IP address of the PC so that the CANFDNET-100T/200T module and PC are on the
same network segment.
(2)
Power the CANFDNET-100T/200T module with a DC of 10-30V.
(3)
Insert the LAN cable into the plug labeled LAN and connect it either to a hub or switch, or directly
to the PC using a crossover cable.
(4)
Run CANFDNETConfig.exe.
(5)
Using the CANET-I II Config software to modify the parameter of Ethernet and CAN port.
(6)
Run NetAssist.exe.
(7)
Now you can send and receive any CAN (FD) packet based on CAN2.0A or CAN2.0B.
