NANOSYSTEM
FABRICATION FACILITY (NFF), HKUST
Version 1.0
Page 17 of 20
Raise the outer sleeve of the lift-lock of the power head, as shown in Fig.
12-step 1.
Insert the sample holder, and gently rotate it until it aligns to the lock, as
shown in Fig.12-step 2.
Release the outer sleeve of the lift-lock, the sample holder will be fixed to
power head, as shown in Fig. 12-step 3.
Check whether the sample holder is fastened or not by your hand.
Position the polishing head and it is ready to begin the polishing cycle.
Step1
Step2
Step3
Alignment lock
Fig. 12 Sample loading
