16
4D LABS, Simon Fraser University 8888 University Drive, Burnaby, B.C. V5A 1S6
E
T
778.782.8158
F
778.782.3765
W
www.4dlabs.ca
To stop the process, press and hold the PAUSE / STOP button for about 3 seconds
When the STOP function has been selected all parameters return to their default settings. To
resume machine operation, press the SPEED button.
To resume machine operation, press the PAUSE / STOP button again for approximately one
second. All parameters will be maintained and the time display field will continue counting.
Exchanging grinding and polishing discs
To exchange grinding and polishing discs, firstly ensure that the Power Head is raised from the platen, and
positioned away from the base using the locking handle.
Carefully lift away the used grinding or polishing disc from the magnetic platen, and replace with your next
appropriate disc.
Used SiC grinding discs can be placed into a zip-lock bag and placed in the nanoparticle waste bin.
Diamond abrasive discs should be cleaned with water and placed back into zip-lock bag. Place this
back into the grey storage drawers.
Reseal polishing cloth discs into a zip-lock bag, to ensure that it keeps wet. Place this back into
the grey storage drawers.
After use
At the end of your session please complete the following checklist:
1.
Turn off the machine.
2.
Replace all polishing cloths to zip-lock bags so that they do not dry out. Store in the correct filing
drawers.
3.
Detach the sample holder from the Power Head, clean thoroughly with water & IPA, and store in
the grey wall cabinet.
4.
Clean the single force fingers:
Gently pull down the fingers and wipe using a Kim-wipe and IPA to remove any debris.
