AAS 2.0 interlock user manual Ver:1.0
10. Safety and Precautions
1)
Before using the device, please be sure to read the user manual in order to insure proper
use.
2)
Make sure the handset is connected to the control box using the coil cable.
3)
When it is time to calibrate the device, if it is in service time out, or violations exceeded
the device settings, your device will go into lockout. Please contact your service center
right away to have the device reset.
4)
Please store the device in a safe location to avoid unnecessary mechanical vibration,
shaking, liquids, or excessive heat.
5)
Please use a damp cloth to clean up the device case, do not use chemicals or heavy-duty
synthetic detergents, or any products that may damage the device.
6)
Please do not paint the device.
7)
Please do not detach the antenna or replace it with other antenna or objects, since this may
negatively impact its communication quality.
8)
Please install the device in a safe place to avoid liquids, impact, or excessive vibration.
9)
The device and its accessories are not impervious to water.
10)
Please use the manufacturers designated accessories. The usage of other accessories will
result in the warranty being voided. The manufacturer will not take responsibility for any
damage made to the device due to the use of “non
-
original” a
ccessories.
11)
Please do not burn with flame or add excessive heat to the device.
12)
Please do not store the device in high humidity, high-heat, or a high dust environment.
13)
Please do not place the device in or on any equipment such as a microwave oven that may
damage the device or its accessories.
14)
Please do not attempt to disassemble the device or its accessories.
