1
Explanation of symbols and safety instructions
SU500.5... | SU750.5... | SU1000.5... | SM500.5E... | SM750.5E... | SM1000.5E... | SMH400.5E... | SMH500.5E... – 6 720 821 493 (2017/05)
43
1
Explanation of symbols and safety instructions
1.1
Key to symbols
Warnings
The following signal words are defined and can be used in this
document:
•
NOTICE
indicates that material damage may occur.
•
CAUTION
indicates that minor to medium personal injury may occur.
•
WARNING
indicates that severe to life-threatening personal injury
may occur.
•
DANGER
indicates that severe to life-threatening personal injury will
occur.
Important information
Additional symbols
1.2
General safety instructions
General
These installation and maintenance instructions are intended for
contractors.
Failure to observe the safety instructions can result in personal injury.
▶ Read and follow the safety instructions.
▶
At least two
persons are required for transportation and installation!
To ensure trouble-free operation:
▶ Observe these installation and maintenance instructions.
▶ Install and commission heat sources and their accessories in
accordance with the installation instructions provided.
▶ Never use open expansion vessels.
▶
Never close the pressure relief valve!
2
Product information
2.1
Determined use
Enamelled DHW cylinders are designed for heating and storing potable
water. Please observe country-specific regulations, guidelines and
standards for potable water.
Enamelled SM500...1000.5E... and SMH400...500.5E... DHW
cylinders may only be heated via the solar circuit with heat transfer
medium.
Enamelled DHW cylinders may only be used in sealed unvented systems.
Any other use is considered incorrect. Any damage resulting from non-
intended use is excluded from liability.
2.2
Scope of delivery
400/500 litre cylinder
• Storage cylinder made of PU rigid foam
• Thermal insulation:
– ErP "B": additional thermal insulation 40 mm
– ErP "C": foil jacket on flexible foam underlayer
• Casing lid
• Upper insulation
• Hand-hole cover
• Technical documents
750/1000 litre cylinder
• Storage tank
• PU rigid foam halves
• Thermal insulation:
– ErP "B": polystyrene jacket, packaged separately
– ErP "C": foil jacket on flexible foam underlayer
• Casing lid
• Upper insulation
• Floor insulation
• Round hand-hole cover with insulation
• Bag with accessories:
– Rectangular hand-hole cover
– Fleece strip
– Fleece circular blank
– Compass and plug
• Technical documents
Warnings in the text are indicated by a warning triangle.
In addition, signal words are used to indicate the type
and seriousness of the ensuing risk if measures for
minimising the danger are not taken.
This symbol indicates important information where
there is no risk to people or property.
Symbol
Explanation
▶
Step in an action sequence
Cross-reference to another part of the document
•
List entry
–
List entry (second level)
Table 1
Requirements
for potable water
Unit
Value
Water hardness
ppm CaCO
3
grain/US gallon
°dH
°fH
> 36
> 2.1
> 2
> 3.6
pH value
–
6.5...
9.5
Conductivity
μS/cm
130...
1500
Table 2 Requirements for potable water
