Buderus GB402-320-5, Инструкции по установке и обслуживанию для подрядчиков

Страница: 31 / 64

7 Start up the heating system
Logano plus GB402 – 6 720 820 700 (2018/01) 31
7.18 Commissioning report
▶ Confirm commissioning as complete; sign and date the report.
Commissioning work Page Measured values Remarks
1. Fill the heating system and check for leaks 21
2. Have the details regarding water quality in the log been observed? Yes:
- Concentration of additives Additives: Concentration:
3. Record gas parameters: Wobbe index
Calorific value
25 _________ kW/m³
_________ kW/m³
4. Check the gas pipe for tightness 24
– Vent gas line 26
5. Create operating pressure 24
6. Check the ventilation and extract air apertures and the flue connection 26
7. Check the system equipment level 25
8. Commissioning the control unit and burner 26
9. Set the gas type, if required 28
10. Record actual values: 29 Full Load Partial load
- Draught ______Pa ______Pa
- Gross flue gas temperature t
A
______ °C ______ °C
- Air temperature t
L
______ °C ______ °C
- Net flue gas temperature t
A
- t
L
______ °C ______ °C
- Carbon dioxide content (CO
2
) or oxygen content (O
2
) ______ % ______ %
- Flue gas losses q
A
______ % ______ %
- CO value, free of air _____ ppm _____ ppm
11. Testing the gas supply pressure 27 ____________ mbar
12. Check for water leaks during operation 30
13. Function tests 30
– Checking the ionisation current ____________ μA
14. Installing casing parts 30
15. Inform operator; hand over technical documentation 30
16. Correct commissioning by the installing contractor
Signature:______________________
17. User signature
Signature:______________________
Table 13 Commissioning report