1
Model BST 1262, BST 1441,
BST 1551, BST 1632
Before using this product, please carefully read the information contained in this user's manual and on the packaging and keep it
for future use. Changes in the text, design and technical specifi cations may be made without prior notice and we reserve the right
to make these changes. The original version is in the Czech language.
FEATURES AND FUNCTIONS
• Minimum age for use: from 6 years of age
• Function: 1:43 Scale Slot Car Track
• Power adapter (included): Model TL-12 Input: 110-240 V ~ 50/60 Hz; Output: 12 V, 1000 mA
• Assembly instructions provided on an included sheet
• Included contents: track, 2x cars, 2x controllers, power adapter, instructions
ASSEMBLY AND USE
• Assemble the track according to the included instructions, making sure that all parts fi t into each other.
• Place the parts horizontally on the ground facing each other and pull together to connect them.
• Start with the straight sections.
• Once the race track is completely assembled, connect the control elements.
• Place a car into one track (slot), with the guide pin between the metal strips.
• Slowly press the controller and the car will start moving; the more you press, the faster the car will go.
• Now you may place the second car into the second track (slot), then check to make sure that both cars work, if so, you may start
racing.
• When disassembling, pull the tracks apart on a horizontally underlay.
ATTENTION – PRODUCT
• The product must be assembled and put into operation by an adult!
• Do not touch the moving parts of the product. Danger of injury!
• The packaging is not a part of the toy, after unpacking, keep all its parts out of reach of children. Plastic foils present a risk of
suff ocation!
• The product is not designed for children 3 years of age and younger. It contains small parts – danger of swallowing. Some parts
may have sharp edges. Do not leave children playing unsupervised.
• Do not expose the product to sources of heat such as fi re, solar radiation, etc., this could damage the product.
• Do not modify the product in any way, do not tamper with its construction or connection. There is a risk of loss of functionality,
an injury or damage to property.
• Water must not reach the internal parts of the product.
• Do not touch the track with anything while it is in operation.
• Intended for indoor use only.
POWER ADAPTER - SAFE OPERATION
• Before charging, check that the voltage in your power grid corresponds to the parameters on the power adapter.
• Only use the original power adapter supplied by the manufacturer.
• The adapter is not a toy.
• Do not place the device into water or expose it to rain or water.
• Disconnect the device from the mains power supply when not in operation.
• Do not cover the power adapter when it is connected to the mains.
• The power cord must not be replaced. If the power cord is damaged, the device must be disposed of.
• Store in a clean condition in a dry and dark place.
• This device is not designed to be used by persons (including children) with limited physical or psychological abilities or by
persons with insuffi
cient experience and knowledge of operation unless under supervision or unless they are provided with
instructions about the operation of the device by the person responsible for the safety of these people.
• Adhere to all safety instructions to prevent damage to property or injuries.
• In the event that while it is plugged into a mains power socket you have a suspicion of any type of electrical fault (smell,
overheating, change in colour, deformation), immediately disconnect the power adapter from the mains and do not use it any
more. If you have a suspicion that water has entered the electrical components, take the device to a specialised service centre
to eliminate any possible damage to the protective insulation of the product.
EN
