now!Board™ User Manual 27
•
To install batteries in the wand:
o
The battery compartment is located on the handle of the wand.
o
Use a Phillips screwdriver to remove the screw on the battery door.
o
Remove the battery-compartment door.
o
Install batteries as indicated inside the compartment.
o
Replace compartment door.
Battery Care and Maintenance Tips
•
Use two (2) AAA batteries (in both the stylus and wand).
•
Be sure to insert batteries correctly (with adult supervision) and always follow the product
and battery manufacturer’s instructions.
•
Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
•
Do not mix new and used batteries.
•
Insert battery with the correct polarity. Positive (+) and negative (-) ends must be inserted
in the correct directions as indicated inside the battery compartment.
•
Do not recharge non-rechargeable batteries.
•
Only charge rechargeable batteries under adult supervision.
•
Remove rechargeable batteries from the product before charging.
•
Only use batteries of the same or equivalent type.
•
Do not short-circuit the supply terminals.
•
Always remove weak or dead batteries from the product.
•
Remove batteries if product will be stored for an extended period of time.
•
Store at room temperature.
•
Please retain these instructions for future reference.
Warranty and Registration
For warranty and product registration, please visit mynowboard.com.
Software Update
Be sure to check for the latest version of the now!Board
™
software by clicking on the
Settings
icon in the palette and
choosing
Update Software
. You can also download the latest version at mynowboard.com.
Carrying the Device
The now!Board
™
carrying case is designed to hold your now!Board
™
securely.
Note:
Be sure to remove batteries from the stylus and wand before storing to help prevent battery depletion.
Troubleshooting and Support
See the table below for assistance with technical issues. For additional assistance, please visit
www.mynowboard.com
,
or call 1-800-561-0301.
