BucksMont T61 series, Инструкция по установке и эксплуатации

Страница: 9 / 19

19 | P a g e
1. Press the Warmer or Cooler button to change the programmed set point.
a.
The “Run Schedule” and “Hold” button will be displayed
b.
After 10 seconds, the “HOLD UNTIL” icon will be displayed
The thermostat will now control off the new set point until the next event. At the time of the next
event, the set point will change to the programmed set point for that event.
To prevent the set point from changing at the next event time, place the thermostat in “HOLD” mode
(Fig.3).
2.
Press the “HOLD” button and the “HOLD UNTIL” icon will change to “HOLD”.
1.
The thermostat will control at the displayed set point until the “Run Schedule”
button
is pressed. Pressing the “Run Schedule” button returns the thermostat to
the scheduled programming mode.
How Your Thermostat Functions
Heat mode
Heat mode:
1. Heating is activated when the set point is higher than the room temperature.
2. When the system is heating the icon will be displayed.