Page 5
INSTALLATION
Your New Buck Ventless Firebox Enclosure may be installed in Residential or *After-Market
Manufactured Mobile Homes. This appliance may be installed in an *After Market Manufactured
Mobile Home,
where not prohibited by state or local codes.
* (After Market: Completion of sale, not for purpose of resale from manufacturer).
NOTE:
See page 13, for “Producing Adequate Ventilation”.
CHOOSING LOCATION FOR YOUR FIREBOX
Figure 1 shows some of many ways your firebox may be installed. Consider traffic pattern in your
room and location of doors and windows. Moving air from ceiling fans, open doors and hot air grills
may cause flames to impinge logs resulting in sooting. If a disturbance is found that affects flames, it
must be eliminated by turning off ceiling fan, closing door or closing hot air register. A corner
location may be best where space is limited.
Your Ventless Firebox Enclosure weighs no more than some of your fine furniture. If firebox is
located near a load bearing wall, additional supports to foundation will not be necessary. HEAVY
FACINGS, SUCH AS BRICK, STONE, ETC., MAY REQUIRE ADDITIONAL FOUNDATION
SUPPORT.
NOTE: WHEN FIREBOX IS INSTALLED DIRECTLY ON CARPETING, TILE OR OTHER
COMBUSTIBLE MATERIALS, OTHER THAN WOOD FLOORING, FIREBOX SHALL BE
INSTALLED ON A METAL OR WOOD PANEL EXTENDING FULL WIDTH AND DEPTH
OF ENCLOSURE.
GAS LINE
The gas supply line and electrical supply must be
installed before framing in fireplace by a licensed
installer. This appliance when installed, be electrically
grounded in accordance with local codes or in absence
of local codes, with
National Electrical Code, ANSI \
NFPA 70.
DRAFTS
Do not locate fireplace in high traffic areas or areas
exposed to high drafts and winds.
Locate
fireplace
away from furniture and draperies.
ROOM DIVIDER
PARTIAL ROOM PROJECTION
F
U
L
L
R
O
O
M
P
R
O
J
E
C
T
IO
N
FLUSH
CORNER
Figure 1
