Page 8
Installation
LP Gas Tank Installation
To operate you will need (1) filled standard LP gas tank (20#) with external valve
threads.
Note: An empty standard LP gas tank weighs approximately 18 lbs. A filled standard LP
gas tank weighs approximately 38lbs.
Caution: LP gas tank must be properly disconnected and removed prior to moving
this appliance. Make sure LP gas tank valve is closed by turning valve
clockwise before disconnecting from appliance.
Open tank door at bottom appliance. Remove bottom tank stop and place a filled LP gas
tank in tank holder. See Figure 3. Replace bottom tank stop. Connect the regulator and
hose to tank and follow test for leaks. See Page 10.
PIPE
CONNECTION
LP GAS VALVE
LP GAS
REGULATOR
FULL LP
GAS TANK
TANK
HOLDER
BOTTOM TANK
STOP
TANK DOOR
REGULATOR
Figure 3.
