Page 4
INSTALLATION
Your New Buck Ventless Firebox Enclosure may be installed in Residential or *After-Market
Manufactured Homes. This appliance may be installed in an *After Market Manufactured Home,
where not prohibited by state or local codes.
* (After Market: Completion of sale, not for the purpose of resale from manufacturer).
NOTE:
See page 13 for
“Producing Adequate Ventilation”
.
CHOOSING THE LOCATION FOR YOUR FIREBOX
Figure 1 shows some of the many ways your firebox may be installed. Consider traffic pattern in your
room and location of doors and windows. Moving air from ceiling fans, open doors and hot air grills
may cause flames to impinge logs resulting in sooting. If a disturbance is found that affects flames, it
must be eliminated by turning off ceiling fan, closing the door or closing hot air register. A corner
location may be best where space is limited.
Your Ventless Firebox Enclosure weighs no more than some of your fine furniture. If firebox is
located near a load bearing wall, additional supports to foundation will not be necessary. Heavy
facings, such as, brick, stone, etc., may require additional foundation support.
NOTE:
When firebox is installed directly on carpeting, tile, or other combustible materials,
other than wood flooring, firebox shall be installed on a metal or wood panel extending full
width and depth of enclosure.
ROOM DIVIDER
PARTIAL ROOM PROJECTION
F
U
LL
R
O
O
M
P
R
O
JE
C
T
IO
N
FLUSH
CORNER
Figure 1
GAS LINE
The gas supply line and electrical supply must be
installed before framing in fireplace by a licensed
installer. This appliance when installed, should be
electrically grounded in accordance with local codes or
in absence of local codes, with
National Electrical
Code, ANSI \ NFPA 70.
DRAFTS
Do not locate fireplace in high traffic areas or areas
exposed to high drafts and winds. Locate fireplace away
from furniture and draperies.
Содержание 42ZCBB
Страница 2: ......
