4.
Reassembly
BathyCorrometer
®
M k V
t o P R O ’ U P G R A D E M A N U A L
Preparing the new electronics
Using wire strippers, strip 3mm insulation from each of the 6 wire tails and attach the new, smaller crimp
terminals (part no. 2002-0032) to each wire with a crimp tool.
Carefully insert the 6 terminals/wires into the rear of the new 6-way multi-plug (part no. 1012-0032),
ensuring they lock into place and that the wires are inserted into the multi-plug in the correct order.
See the illustration for the correct multi-plug wiring order.
IMPORTANT:
incorrect wiring of the 6-way multiplug is likely to
cause irreparable damage to the BathyCorrometer Pro’s
electronics assembly.
Electronics connection plug
Battery connection socket
BathyCorrometer Pro’ wiring harness
Electronics assembly
Electronics connection socket
Black
White
Orange
Purple
Blue
Yellow
Attach the self-adhesive battery isolation disc (part no. 4005-0003)
to the rear of the electronics assembly, taking care not to obscure
the screw attachment holes.